Skip navigation
Please use this identifier to cite or link to this item: http://elar.nung.edu.ua/handle/123456789/98
Full metadata record
DC FieldValueLanguage
dc.contributor.authorOliynyk, A. P.-
dc.contributor.authorShtayer, L. O.-
dc.date.accessioned2016-06-15T08:07:35Z-
dc.date.available2016-06-15T08:07:35Z-
dc.date.issued2014-
dc.identifier.citationOliynyk, A. P. Modeling of fluid flow in pipeline with the leaks due to the surface = Моделювання течії рідини в трубопроводі за наявності витоків через поверхню / A. P. Oliynyk, L. O. Shtayer // Journal of Hydrocarbon Power Engineering. - 2014. - Vol. 1, № 1. - P. 45-52.uk_UA
dc.identifier.urihttp://elar.nung.edu.ua/handle/123456789/98-
dc.description.abstractA mathematical model of viscous fluid flow in the pipeline with the presence of leaks due to their surface, which is based on a system of Navier-Stokes equations in two-dimensional rectangular region with a special type of boundary conditions has been designed. The geometric configuration of the leakage zone is taken into the account. It is believed that the fluid motion is under the influence of constant length of pressure difference. For the solving of this system, the numerical method of finite differences was developed by which the finite differences scheme is realized - the first step is implicit in longitudinal coordinate, and the second - on the transversal. The study on the stability of the spectral features method, stability conditions are established for the case of flow calculation with specified parameters and for the given type of the pipeline geometry. The calculations were made for a wide class of boundary conditions that established the patterns of distribution of velocities in different configurations and leakage areas in their absence, it was found that conspicuous effects of leaking occuring in the area around the pipe walls. The pattern of deviations from symmetry of the distribution of values of the longitudinal component was establishe, it depends on the distance of the leak, of the speedchange of the zone near the pipe wall, it also depends on the leakage intensity and the estimated parameters of the grid. It was set that the behavior of the flow in the zone near the wall after the longitudinal component derivative turned zero. The results can be used in designing the localization of small oil leaks from different areas of leakage configuration, the indicated technique can also be used in the study of utility and process piping in many different industries. It was found that the developed method adequately describes the phenomenon. Directions for further research are as follows: identification of dependencies different kinds of liquids, piping specifications, configuration leakage areas and exploration of the case for more complex dependencies pressure on the coordinates of the investigated area.uk_UA
dc.language.isoenuk_UA
dc.publisherIvano-Frankivsk National Technical University of Oil and Gasuk_UA
dc.subjectflow velocityuk_UA
dc.subjectleakage coordinatesuk_UA
dc.subjectmathematical modeluk_UA
dc.subjectNavier-Stokes systemuk_UA
dc.subjectnumerical methoduk_UA
dc.subjectstabilityuk_UA
dc.titleModeling of fluid flow in pipeline with the leaks due to the surfaceuk_UA
dc.title.alternativeМоделювання течії рідини в трубопроводі за наявності витоків через поверхнюuk_UA
dc.typeArticleuk_UA
Appears in Collections:Journal of Hydrocarbon Power Engineering. - 2014. - Vol. 1, № 1

Files in This Item:
File Description SizeFormat 
3516p.pdf400.57 kBAdobe PDFView/Open
Show simple item record   Google Scholar


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.